Tough Bison Clear Sealer for Acrylic Paint
Official product guide: what it is, how to use it, and where it should not be used.
A brush-on clear top coat for the things you paint and keep outside: rock art, terracotta and ceramic planters, garden signs and painted wood. It is a water-based pure acrylic emulsion. It brushes on milky, dries clear with a matte finish, and does not yellow.
- Works over acrylic, latex and chalk paint
- Holds up to sun and rain; stays flexible, so it does not crack or peel
- Low VOC, low odor, cleans up with water
- Each jar includes 1 brush and 2 gloves
Specifications
| Product type | Clear protective top coat (sealer), brush-on |
|---|---|
| Base | Water-based pure acrylic emulsion |
| Finish | Clear, matte |
| Form | Paste; milky when wet, clear when dry |
| Size | 35 oz (1 kg) net weight |
| Coverage | Up to 14 sq ft per jar |
| Coats | 2 to 3 thin coats |
| Dry time between coats | 2 to 4 hours |
| Full cure | About 48 hours in dry conditions; longer in humid weather or on damp surfaces |
| Application temperature | 41°F to 95°F (5°C to 35°C), dry conditions |
| VOC | Low VOC |
| Clean-up | Water |
| In the box | 1 jar of sealer, 1 brush, 2 gloves |
| Amazon ASIN | B0FDVK73W2 |
How to use
- Prepare. Make sure the surface is clean and the paint is fully dry.
- First coat. Brush or sponge on a thin coat. It goes on milky and dries clear.
- More coats. Let each coat dry 2 to 4 hours, then apply the next. Use 2 to 3 thin coats in total.
- Cure. The finish cures in about 48 hours in dry conditions. Allow longer in humid weather or on damp surfaces, and keep it away from rain, sprinklers and washing until cured.
Thin coats work better than one thick coat. The finish can be painted over after full cure.
Where it works, and where it does not
Made for
- Acrylic-painted rocks and stones
- Terracotta and ceramic planters
- Painted garden signs and outdoor crafts
- Painted wood, fences and stepping stones
- Concrete, brick, stone, plaster and walls
- The outside and rim of concrete bird baths and fountains
Not made for
- Surfaces kept underwater: the inside of bird bath bowls, fountain basins, ponds or pools
- Blocking UV light: it is a clear protective coat that holds up to sun, not a UV-filtering coating
Safety
- Low-VOC, water-based pure acrylic emulsion. Non-toxic once cured and safe around plants and backyard birds.
- No spray and no fumes. Cleans up with water.
Questions
Does it yellow?
No. It dries clear with a matte finish and does not yellow.
Is it glossy or matte?
Matte.
How many coats do I need, and how long between them?
2 to 3 thin coats, 2 to 4 hours apart. It cures in about 48 hours in dry conditions; allow longer in humid weather or on damp surfaces.
How much does one jar cover?
Up to 14 square feet per 35 oz (1 kg) jar.
Can I use it inside a bird bath, fountain or pond?
No. It handles rain and splashes but is not made for surfaces kept underwater. It can be used on the outside and rim of concrete bird baths and fountains.
Is it a spray?
No. It is a brush-on paste. A brush and gloves are included.
Is Tough Bison related to the Bison adhesives brand?
No. Tough Bison is a separate brand and is not affiliated with Bison adhesives and sealants from the Netherlands.